Prince Albert Hot Springs

Prince Albert Hot Springs is a remote two-pool soak in the Mt. Bennett Hills area north of Glenns Ferry, Idaho — and the approach is the story. The dirt road in deteriorates into a creek bed, turns to impassable muck in rain and winter, and defeated both documented attempts to reach it. Plan for the dry season and a capable 4×4.

Red spider mites have been reported at this hot spring, so keep clothing and towels off the rocks and ground around the pools.

Pool Condition

The upper pool has rock and dirt walls with a dirt and silt bottom. The second, lower pool is a long metal trough that can be drained and filled. The old listing puts the water at 101–109°F, with low use — but note that the listing was never confirmed by a completed soak visit (see the road notes below).

Seasonal Notes

Unless you have a monster truck, don’t expect to reach the hot springs during winter or heavy rain. The road turns into muck-pots in rain and may be washed out as you get closer to the springs, where a creek runs through it. A 4×4 is recommended except during the dry, warm months.

Camping

There are a few primitive sites available near the hot springs.

Prince Albert Hot Springs Soak Stats

• Access Type: 4×4 road (impassable when wet)
• Area: Mt. Bennett Hills
• Water Temperature: 101–109°F (as listed; unconfirmed by a soak visit)
• Visibility: Low
• Nearest Town: Glenns Ferry (north of)
• Wildlife: Mule deer
• Usage Level: Low